total station survey Flow Totalizer

-Intelligent Flow Totalizer - LED or LCD panel - Support RS485 - total station survey MOQ 1

AI-708H FLOW TOTALIZER total station survey

Main Features- Modularized structure and hardware compatible with other AI series instruments andmodules, which make it easy to maintain and quick delivered.

- Modularized and configurable inputs. The flow input can be 1-5V, 0-5V, 4-20mA orfrequency signal, and special user defined input specification is also available. Thetemperature input can be configured to Pt100 RTD, K, E, J type thermocouple,voltage, or current signal. The pressure input can be various voltage or currentsignal.- Abundant functions such as retransmission, high/low alarm of momentary flow,temperature and pressure, abnormal signal detecting, and communication withcomputer are available.- Square root/no square root selectable ,8-digits accumulation value and 4-digitsmomentary process value, small signal cut-out can be set at any range.- It has perfect temperature and pressure compensation used for general gas,saturated steam, overheat steam and liquid. The compensation calculation with themethod of table look-up has a high accuracy in the steam measurement application.Special function can be carried out by enhancing the compensation formula uponcustomers' demand.- As used as batch controller, it has 4-bit accumulator for control and 12-bitaccumulator for total sum individually.- With high precision current module installed, the totalizer can provide retransmissionwith 14 bit output resolution and 0.2%FS output precision.

Specification:

Module	Module Descriptions	M1	M2	OUTP	ALM	AUX	COMM
N	no module installed	√	√	√	√	√	√
I0	Temperature input is thermocouple, RTD or mV signal input; pressure or flow input is 0-5V or 1-5V voltage signal	√
J4	2 channel current inputs of 0-12mA, 4-20mA, 0-20mA etc.	√
J5	2 channel two-wire transmitter provided 24VDC power supply.	√
I2	Switch / frequency signal input interface for inputting external switch or frequency signal, has a 12VDC power supply for external transducer.		√
I3	Single 0-5V/1-5V voltage signal input, with 24V/50mA power supply for external transducer		√
I4	0-20/4-20 mA analogue input interface, providing a 24VDC/24mA power supply for a two-wire transmitter		√
V5/V10/ V12/V24	Isolated 5V, 10V, 12V or 24V DC output with maximum current 50mA. (use instrument’s internal 24V isolated power)	√	√	√	√	√	√
L1	1 relay contact output (Capacity: 2A/250VAC, normal open terminal can absorb spark)			√	√	√
L2	1 relay contact (NO+NC) output. (small volume, 30VDC/1A, 250VAC/1A)			√	√	√
L4	1 relay contact (NO+NC) output. (small volume, 30VDC/2A, 250VAC/2A)			√	√	√
L5	2 relay contact(ON) outputs.(30VDC/1A,264C/1A)				√	√
W1	TRIAC no contact normal open output. (100~240VAC/0.2A)			√
W2	TRIAC no contact normal closed output. (100~240VAC/0.2A)			√
G	SSR voltage outputs (12VDC/30mA)			√
X3	0~20/4~20mA linear current output module.  (Use internal 12VDV power of the instrument)					√
X5	0~20/4~20mA linear current output module. (With its own isolated power)					√
S	Photoelectric isolated RS485 communication module (use instrument’s internal 12V isolated power)						√
S4	Photoelectric isolated RS485 communication module with its own  photoelectric isolated power						√
R	RS232 communication interface (use instrument’s internal 12V isolated power)					√

Ordering code:

total station survey Flow Totalizer